Phoenix HT User Manual
© 2007–2012 Rigaku Automation, Inc.
16
401718 Rev A
3. To register the sample(s) on the deck, click the Register Samples button
in the lower
right-hand corner of the window and click
OK
when a message to register additives appears.
4. For each sample of the three samples in this example job, select the appropriate entry for each
field, then click
OK
.
Block Location:
The slot location of the sample in the chiller block.
Return Block Location:
The slot location for the residue returned (the purge back over the
aspirated sample.
