Rigaku 2080A211, Инструкция по эксплуатации

Страница: 96 / 115

Sample Plates
88
SmartLab: Automated Multipurpose X-ray Diffractometer
Capillary holder (option: 2430C101)
The capillary holder is used to mount the capillary sample onto the capillary spin
attachment. The capillary sample is spanned with the rotation (
ω
c
) axis during
measurements. Attach the capillary sample to the capillary holder and mount the
holder to the capillary spin attachment. The prepared sizes of the holder are
φ 1.0
mm, φ 0.7 mm, etc. Use the appropriate size for the capillary to be used.
Capillary spin attachment and capillary holder
Wafer sample plates and sample spacers
A wafer sample plate is used in measurements of wafer-shaped samples. A
sample spacer is placed on the attachment. The wafer sample plate is placed on
the sample spacer. A sample is placed on top of the wafer sample plate. Wafer
sample plates and sample spacers are available for 4-inch, 6-inch, and 8-inch
samples.
Wafer sample plate and sample spacer
CAUTION
Placing a sample larger than the sample plate may damage the sample during
measurement.