Rigaku 2080A211, Инструкция по эксплуатации, Страница: 95 / 115

SmartLab: Automated Multipurpose X-ray Diffractometer
87
Sample Plates
Select a sample plate based on the sample to be measured.
Height reference sample plate
Insert a glass sample holder or aluminum sample holder into the height reference
sample plate.
Place the height reference sample plate directly on the attachment.
To make adjustments, insert a center slit and Si powder reference sample.
Height reference sample plate
Transmission SAXS sample plate (option: 2680J111)
A transmission SAXS sample holder is inserted into the transmission SAXS
sample plate.
The transmission SAXS sample plate is placed directly on the attachment.
Transmission SAXS sample plate
・
Normally the height reference sample plate and transmission SAXS sample plate
should be used on top of the standard attachment. If using the height reference sample
plate or transmission SAXS sample plate with an attachment other than the standard
attachment, you must set each attachment axis to 0.
・ To install/remove each sample plate to/from an attachment, see Installing and removing
wafer sample plates .