Rigaku 2080A211, Инструкция по эксплуатации, Страница: 27 / 115

SmartLab: Automated Multipurpose X-ray Diffractometer
19
Turning On and Off SmartLab
Described below are the procedures for turning on and off SmartLab.
Turning on SmartLab
1
Make sure that the HV ENABLE key on the main panel is unlocked
(the key is in the horizontal position).
If it is locked (the vertical position), turn the key clockwise to unlock it.
Main panel
2
Press the “|” ON button.
3
Make sure the OPERATE lamp lights up in green.
The OPEARATE lamp blinks while SmartLab is starting up and when an error occurs. For
more information, see
Appendix Using the OPERATE Lamp .
Starting SmartLab Guidance
1
Click the Start button. Select All Programs → Rigaku → SmartLab
Guidance, then select SmartLab Guidance.
2
The login window will appear. Enter the registered user name and
password in the Login name and Password boxes, and click the OK
button. (When launching the software for the very first time, enter
administrator in the Login name box and click the OK button without
entering a password.)
3
The control axes are initialized after the software is launched.
Confirm that the key
is unlocked.