Riftek RF627 Series, Руководство пользователя

Страница: 94 / 130

94
Laser Scanners
RF627, RF627Smart [Revision 2.1.2] 20.09.2021
28. Annex 2. Editing defective pixels
During the operation of the scanner, defective pixels may appear in the CMOS
sensor, which significantly distort the profile extracted from the image. The procedure for
marking defective pixels is given below. After marking, the signal value of the defective pixel
is automatically calculated as the result of interpolating the signal of adjacent pixels.
The button for enabling the mode of editing defective pixels of the CMOS sensor
( EDIT PIXELS button) is located in the web interface of the scanner in the area of
additional display parameters next to the button for stopping / starting the video stream.
When this mode is enabled, a window with a list of defective pixels is displayed.
To add a pixel to the list, click in an empty row of the table (X and Z coordinates
are equal to zero), and then left-click on the defective pixel in the image. The cursor
automatically selects the current pixel with an indication of its coordinates. To exit this
mode, click .