RF602 [Revision 1.2.0] 28.01.2019
Laser Triangulation Sensors. RF602 Series
25
13.6. Connection via the Modbus RTU protocol
Select
File > Run Modbus protocol
.
To read the
Holding Registers
, select the corresponding option from the drop-
down list in the lower left part of the window. Write the address of the initial register
(
Address
) and their number (
Count
), then click
Send
.
To read the
Reading Registers
, select the corresponding option:
To write to the register, select
Write Single Register
, specify the address and
required value, then click
Send
.
To change the protocol, write the required value to register 39 (0 - RIFTEK protocol,
1 - ASCII format, 2 - MODBUS protocol).
