RIEXINGER BSM 630, Руководство по эксплуатации

Страница: 36 / 70

34 7. Operation
7.4 Setting the sawing angle
Pos. Description
1 Angle scale
2 Quick tensioning lever to fasten selected angle
3 Reference pointer
Danger!
Running saw band may cause serious severance injury!
The swivel-mounted saw bow may pose pinch point hazard!
l
The machine may only be operated by one person.
l
The sawing angle may only be adjusted when the machine motor is turned
off.
l
Before setting the sawing angle, the operator must ensure that the area
behind the workpiece and the work area are clear.
l
The Operator must ensure that saw bow is in the rear home position.
Mitre cuts
The BSM 630 has a mitre range of 45 degrees. on one side. This allows mitre
cuts to one side.
1) If not yet done, push saw bow in its rear home position.
2) Ensure that there are no people or obstacles in the swivel range area of the saw frame.
3) Loosen the quick-tensioning lever on the saw-angle adjustment equipment.
4) Carefully and slowly swivel the saw frame in the appropriate direction until the reference
pointer shows the desired angle value on the angle scale.
5) Secure the set angle position of the saw frame by tightening the quick-tensioning lever.
BSM 630