RIEXINGER BSM 630, Руководство по эксплуатации

Страница: 25 / 70

5. Delivery, in-company transport and storage 23
5. Delivery, in-company transport and storage
5.1 Delivery
l
The BSM 630 is delivered by a transportation company and off-loaded at the customer's
operating site.
l
On delivery, the machine is assembled together or partially assembled. If the machine is
delivered partially disassembled, note mounting instructions (see Chap. 6.4 on p. 27)
l
The screwed-on feet of the BSM 630 have been removed for transportation. The machine
is transported and delivered upright on wooden blocks.
1) Immediately check the off-loaded machine for visible transportation damages. If the machine
has been damaged, document the details and promptly report this to the transportation company
and manufacturer.
2) Check also if the delivery contents of the BSM 630 are complete (see Chap. 3.2 on p. 15).
5.2 Environmental conditions for storage and transport
Temperature -10 to +40 degrees C
Relative humidity 15-55%, non-condensing
Attention!
Improper environmental conditions may cause damage to machine!
Protect the machine, and especially the electrical equipment, from moisture, rain
and dust. The BSM 630 may not be set up or stored outside.
5.3 In-company transport
Warning!
Crushing hazard for arms and legs during transport and machine setup!
l
Only authorised persons may carry out the in-company transport and setup
of the machine (see Chap. 2.5 on p. 10) according to valid APR.
l
Also ensure that no persons are in the transportation path or in the setup
area and wear safety shoes with toe-protection caps.
BSM 630