Riello Vokera Easi-Flo LE, Инструкция по установке и обслуживанию

Страница: 9 / 28

9
4 INSTALLATION
4.1 Delivery
The appliance is delivered in a heavy-duty cardboard carton. Lay the
carton on the floor with the writing the correct way up.
4.2 Contents
Contained within the carton is:
- the appliance;
- the wall mounting bracket and stand-off brackets;
- template;
- an accessories pack containing the appliance service valves and
washers;
- the instruction pack containing the installation & servicing instruc-
tions, user instructions and a 3-amp fuse.
4.3 Unpacking
At the top of the carton pull both sides open – do not use a knife – un -
fold the rest of the carton from around the appliance, carefully remove
all protective packaging from the appliance, and lay the accessories
etc. to one side.
4.4 Preparation for mounting the appliance
The appliance should be mounted on a smooth, vertical, surface,
which must be capable of supporting the full weight of the appliance.
Care should be exercised when determining the position of the appli-
ance with respect to hidden obstructions such as pipes, cables, etc.
When the position of the appliance has been decided – using the
template supplied – carefully mark the position of the wall-mounting
bracket and flue-hole (if applicable).
b
Position the cartoon template and trace the two upper holes Ø
8 mm. Trace the two lower holes Ø 8 mm at a distance from the
upper holes of 579 mm.
Fix the stand-off brackets (the stand-off brackets should only
be used if the flue is exiting to the rear).
b
Attach the wall mounting bracket.
270
118
120
10
380
320
346
ø110
ø8
ø8
579 mm
MAXIMUM FLUE LENGTHS
Flue system Easi-Flo UM
Concentric Horizontal 2.60 mt
Concentric Vertical 3.60 mt
Twin flue 6 + 6 mt
4.5 Fitting the flue
The top flue outlet permits both horizontal and vertical flue applications
to be considered, alternatively, the Vokèra twin flue system can be
utilised if longer flue runs are required.
Concentric horizontal flue
(For concentric vertical flue, see pag. 10).
(For twin flue applications, see pag. 11).
The appliance can be used with either the Vokèra 60/100mm concen-
tric Uni-flue system or the optional Vokera twin flue system.
NOTE
These instructions relate only to the Vokèra Uni-Flue 60/100mm con-
centric flue system. The appliance flue outlet elbow can be rotated
through 360º on its vertical axis. In addition the flue may be extended
from the outlet elbow in the horizontal plane. A reduction must also be
made to the maximum length (see table below) when additional bends
are used.
20
20
200
Reduction for additional bends
Bend Reduction in maximum flue length for each bend
45° bend 1.0 metre (60/100) mt
90° bend 1.5 metre (60/100) mt
Horizontal flue terminals and accessories
Part no. Description Min-Max length
2359029 Horizontal flue kit
833 mm
(dimension ‘X’)
2359119 Telescopic flue kit
2359069 750 mm extension 750 mm
2359079 1500 mm extension 1500 mm
2359089 Telescopic extension 350-490 mm
2359049 45º bend (pair) 220mm
2359059 90º bend N/A
529 Wall bracket (5) N/A
Using the template provided (A), mark and drill a 125mm hole for the
passage of the flue pipe. The hole should have a 1º drop from the ap -
pliance to outside, to eliminate the possibility of rainwater entering the
appliance via the flue.
The fixing holes for the wall-mounting bracket should now be drilled
and plugged, an appropriate type and quantity of fixing should be used
to ensure that the bracket is mounted securely.