HEATING ENGINEER
25
b
- Refer to the instruction manuals for the
r
TECH
control panel and for your chosen burner.
1
A
4
5
1
2
- Engage the bottom of the side panels (1) in the bottom
rails (2) and engage the top lip of the side panels in the
slots (A) in the front and rear heads
- Fit your chosen control panel on the top panel (4) as
instructed in the control panel’s own instruction manual
- Route the electrical cables and insert the bulbs/sensors
in their sockets
- Fit the cable grommets provided into their seats in the
panels
- Fit the top panel (4) to close the top of the boiler
- Once all the panels are in place, fit the front cover (5)
over the top of the door.
FITTING THE CASING PANELS
