Riello Residence Condens IS n, Инструкция по установке и эксплуатации

Страница: 19 / 208

Residence Condens IS n
18
ENGLISH
19
DESCRIPTION 30 IS n
Losses for a 45°/90° bend m 1,3/1,6
Hole in wall (diameter) mm 105
Concentric flue gas outlet pipes
Diameter
mm 80-125
Maximum length m 14,85
Losses for a 45°/90° bend m 1/1,5
Hole in wall (diameter) mm 130
Twin flue gas outlet pipes
Diameter
mm 80
Maximum length m 42+42
Losses for a 45°/90° bend m 1/1,5
Installation B23P–B53P
Diameter
80
Maximum discharge length mm 80
Collective smoke pipes under pressure (with specific accessory only)
Max pressure allowed in the smoke pipe when installed with collective smoke pipes
Pa 50 (**)
NOx class 5
Emission values at max-min gas flow rate (***) G20 G31
Maximum CO s.a. lower than ppm 190 200
CO
2
% 9,0 10,0
NOx s.a. lower than ppm 40 40
Flue gas temperature °C 65 67
Minimum CO s.a. lower than ppm 25 25
CO
2
% 9,0 10,0
NOx s.a. lower than ppm 40 40
Flue gas temperature °C 60 58
DHW functions refer only if a water tank is connected (accessory available on request).
(+) The installation of this product is allowed only in the destination Countries contained in the data plate, regardless of the present translation
language.
(**) Applicable with G20 gas only
(***) Check performed with concentric pipe Ø 60-100 - length 0.85m - water temperature 80-60°C
MULTIGAS TABLE
DESCRIPTION Methane gas (G20) Propane (G31)
Lower Wobbe index (at 15°C-1013 mbar) MJ/m 3 S 45,67 70,69
Net Calorific Value MJ/m 3 S 34,02 88
Supply nominal pressure mbar
mm C.A. 20
203,9
37
377,3
Supply minimum pressure mbar
mm C.A. 10
102,0
Residence Condens 30 IS n
Number of diaphragm holes N° 1 1
Diaphragm holes diameter Ø mm 6,0 4,6
Burner diameter mm 63 63
Burner length mm 110 110
CH maximum gas capacity Sm 3 /h 2,64
kg/h 1,94
DHW maximum gas capacity Sm 3 /h 3,17
kg/h 2,33
CH minimum gas capacity Sm 3 /h 0,63
kg/h 0,47
DHW minimum gas capacity Sm 3 /h 0,63
kg/h 0,47
Number of fan rotations with slow ignition rpm 3.300 3.300
Maximum number of CH fan rotations rpm 4.700 4.700
Maximum number of DHW fan rotations rpm 5.600 5.600
Minimum number of CH fan rotations rpm 1.400 1.400
Minimum number of DHW fan rotations rpm 1.400 1.400
Minimum number of fan rotations with collective pipes under pressure rpm 1.900
NOT APPLICABLE
The data indicated must not be used to certify the system; for certification, use the data indicated in the “System handbook” measured during
first ignition.
All the pressure values are measured with the compensation socket disconnected (if present).