background image

18

INSTALLER

INSTALLER

10 

UNPACKING THE PRODUCT

R

 

KOMBISOLAR 3S

 combination cylinders are supplied in a 

single package on a wooden pallet.

The insulation and the lining components of the models 750 

and 1000 are supplied separately from the structural work and 

are to be assembled upon receiving the product as described in 

the paragraph "Assembly of the insulation and the lining".

The following items are delivered in a plastic bag inside the 

packaging:

 

− Instruction manual

 

− Bar code label

 

− Hydraulic test certificate

 

− Energy label (to be applied to device upon installation)

 

− No. 4 adjustable feet to be mounted during installation 

(for models 750 - 1000 only).

 

9

The instruction manual is an integral part of the solar stor-

age cylinder. Once located, read it thoroughly and keep it 

safe.

 

9

For handling operations, thoroughly follow the instructions 

on device package label.

11 

HANDLING

Make sure that any lifting equipment is of adequate capacity to 

lift and move the combination cylinder.

Remove the brackets (1) to free the combination cylinder from 

the pallet.

To lift the combination cylinder, remove the plug (2) and screw 

an eyebolt (Ø 1”) of suitable capacity for the weight into the hole 

(3).

1

2

3

1

1

If suitable equipment is not on hand to lift the combination cyl-

inder off the pallet using the eyebolt, proceed as follows.

 

− Place a platform of about half the height of the pallet 

near the combination cylinder. Make sure the platform is 

able to support the weight of the combination cylinder

 

− Remove the brackets (1) then carefully rotate and slide 

the combination cylinder off the pallet on to the platform

 

− Make sure that the combination cylinder is perfectly sta-

ble, and then remove the pallet

 

− Carefully rotate and slide the combination cylinder off the 

platform on to the floor

 

− Remove the platform and position the combination cyl-

inder as required.

1

1

Adjust the feet to ensure that the storage cylinder is perfectly 

level.

17

 

9

Wear suitable personal protective equipment and use suit-

able safety devices.

 

0

Do not dispose of packaging material into the environment, 

or leave it within the reach of children, since it can become 

a potential hazard. Dispose of packaging material in com-

pliance with applicable legislation.

Installer

Содержание KOMBISOLAR 1000 3S

























Отзывы: