AARIA
34
1. General notices
All RIELLO equipment shall be installed by
skilled operators, authorised, who shall
issue a declaration of conformity for the
state-of-the-art installation, that is to say,
an installation carried out pursuant to the
current Legislation and the instructions in
this booklet.
These units must comply with their
intended use, pursuant to their
performance characteristics.
The units contain refrigerant gas: operate
carefully so as to avoid damaging the gas
circuit and the fin bank.
This booklet must be kept carefully as it
is an integral part of the equipment and
must ALWAYS be present, including in case
of sale of the equipment to another owner
or user, or of transfer to another system.
Should the manual get damaged or lost,
please ask for a duplicate manual from
the RIELLO’s Technical Service.
Repairs or maintenance actions must be
carried out by RIELLO’s Technical Service
staff or other skilled staff, pursuant to
the provisions of this publication. Do not
modify or tamper with this equipment, as
doing so might cause dangerous situation,
for which the manufacturer waives all
liability.
In case of abnormal operation, or leaks
of liquids or refrigerant gases, position
the main switch of the system in the
“off” position and close the stop taps.
Call RIELLO’s Technical Service or other
professionally qualified personnel
immediately. Do not try to repair the unit.
Any contractual and tortious liability
of RIELLO’s for damages to property or
people or animals because of installation,
calibration and maintenance mistakes
or erroneous usage of the equipment is
excluded.
During storms, position the system’s main
switch in the “off” position.
This unit contains fluorinated greenhouse
gases covered by the Kyoto protocol.
Maintenance and disposal activities
must be carried out exclusively by skilled
personnel.
The room must not remain closed for
long periods of time. Open the windows
at regular intervals to ensure the correct
circulation of air.
Too low temperatures are hazardous for
the health and constitute a useless waste
of power. Avoid any prolonged direct
contact with the air flow.
