Riello 20171510, Инструкции по установке, использованию и обслуживанию

Страница: 32 / 60

20171652 30 GB
E-display control
6.3 Main menu
1 INFO menu path [selected]
2 Display of fuel used
3 Bar chart displaying the current performance of the burner
(internal load) in % (0 - 100)
4 MANUAL MODE menu path
5 SETTINGS menu path
6 Access level 2
7 DATA PROCESSING menu path
8 Window number
Select a menu using cursor keys and confirm with
ENTER .
6.4 INFO menu path
Select path using cursor keys and confirm with
ENTER .
The display shows the menu overview.
1 Information on the burner [selected]
2 Serial number
3 Fault history
4 Configuration of the actual value of adjustment outputs
(display only)
5 Software version
6 Digital inputs/outputs
7 Checksum
6.4.1 Consulting the fault history
Displaying burner fault
Select menu using cursor keys and confirm with
ENTER .
The display shows the Selection of fault history menu window.
1 Burner fault pictogram [selected]
Select menu using keys and confirm with ENTER
.
The display shows the Fault history menu window.
1 Fault code display pictogram
2 Fault code (the last 10 faults are stored)
(the fault no. 01 is the most recent one)
3 Diagnosis code 1
4 Diagnosis code 2
5 Number of operating hours at the moment of the fault
NOTE:
fault and diagnosis codes can be found in paragraph “Faults
- Probable causes - Solutions” on page 43.
S9613
INFO
S9347
S9355
S9357