37
1200 Series SmartPanels 1.1 User Manual
0
1
-0
0
0
H
B
0
3
E
G
-B
0
0
5.5
AES67 4-wire App
This chapter describes the required steps to activate the AES67 4-wire operation.
The SmartPanel must be licensed for this function.
Ø
Touch the
gear icon in the Info-display.
Ø
Select the menu: '
Transport
'.
Ø
Select the option '
AES67
'.
The AES67 4-wire can only be used if the SmartPanel is
connected to the matrix via '
AES67
'.
figure 57: transport mode of the
SmartPanel
Open the web interface of the SmartPanel:
·
Enter the IP address in the web browser (e.g. 192.168.41.159).
figure 58: web interface of the
SmartPanel
·
Select the '
Audio A
' or '
Audio B
' Parameter Drawer:
figure 59: Audio A/B tab
·
Change the setting from '
Analogue
' (default) to '
AES67
' for each 4-
wire's individual input or output channel.
figure 60: Analogue -> AES67
·
Click on '
Stream Setup
'.
figure 61: stream setup
1)
Enter the stream parameters.
2)
Alternatively the parameters can be loaded via a SDP-file by
clicking the button '
Import SDP
'.
figure 62: stream parameter
·
In
Audio A
Parameter Drawer:
Activate the 'Select another channel...' switch to select another
channel from the same stream for
Audio B
.
figure 63: selection of Audio B
channel
·
By clicking the '
Submit
' button the connection to the stream is
established immediately and the analogue 4-wire is switched over
immediately.
·
If you click the '
Cancel
' button, all entries are discarded and the
stream setup is closed.
figure 64: confirm/cancel entries
DRAFT
05.10.2020
