18
1200 Series SmartPanels 1.1 User Manual
0
1
-0
0
0
H
B
0
3
E
G
-B
0
0
3.3
Lever Key Numbering
The lever keys are numbered as follows:
figure 22: Numbering of lever keys
3.4
Power-Up
Connect the RSP-1232HL with the mains voltage and wait until the SmartPanel has booted.
If the SmartPanel is not connected to a matrix, you will see the
following contents in the info display on the right:
Info-display
Function
Network
State of the audio network.
Address
IP address of the AES67 port.
Media Port
Selection of the Ethernet-port that is
connected to the AES67 network.
Transport Selected
Shows the current selected transport mode.
Matrix
State of the connection to the matrix.
figure 23: Info-display (no
connection)
If the SmartPanel is connected to the matrix, the matrix status changes to '
RX/TX OK
' before the default
view is displayed.
figure 24: RSP-1232HL (connected with matrix)
·
The name (
key label
) of the corresponding channel is displayed below/above each lever key.
·
The subtitle (
16-char subtitle
) of the corresponding channel is displayed in the second line.
DRAFT
05.10.2020
