Riedel NSA-002A, Руководство пользователя

Страница: 11 / 28

11
NSA-002A User Manual A00
GPO port
The GPO output connector contains 3 single ports.
6 9
1 5
Pin Signal Pin Signal
1 GP-OUT1-P 6 GP-OUT1-N
2 GP-OUT2-P 7 GP-OUT2-N
3 GP-OUT3-P 8 GP-OUT3-N
4 GPIO +5V 9 GND
5 Chassis Chassis Chassis
Figure 6: GPI OUT connector Sub-D-9 male pinout
GND
GPI-OUTn-P
GPI-OUTn-N
Figure 7: GPI OUT connector schematic
·
The GPO output contact rating is 100 mA, 30 VDC maximum (protected by self-healing fuse).
·
The polarity of the output has no preference.
·
The outputs are galvanically isolated.
·
The "GPIO +5V" output voltage drops when increasing the load: 5V @ 0mA / 3.3V @ 50mA.
ETH / PoE – ports
The AES67 ports are used to connect the AES67 network to the NSA-002A.
The AES67 ports are 1000Base-T compatible only.
Furthermore these ports can be used to power (PoE IEEE 802.3af) the NSA-002A.
1 8
Pin Signal PoE Standard color
1 TxRx A + DC + orange/white
2 TxRx A - DC + orange
3 TxRx B + DC - green/white
4 TxRx C + -- blue
5 TxRx C - -- blue/white
6 TxRx B - DC - green
7 TxRx D + -- brown/white
8 TxRx D - -- brown
figure 8: ETH / PoE RJ-45 pinout (8P8C)