Riedel Bolero, Руководство пользователя

Страница: 23 / 84

23
Bolero User Manual A20
2.4.3 Profiles
A Profile is assigned to every Beltpack when it is registered. The profile contains default settings for the whole Beltpack-
Config and user rights indicating which settings of the Beltpack-Config the Beltpacks user is allowed to see and/or to
change.
Using the Admin or Registration Pin, a Profile to be assigned to all newly registered Beltpacks can be chosen in the
Antennas Web Interface or in the Beltpack-Menu.
The Beltpack stays associated to its Profile as long as it is registered. Changes to the Profile will result in changes of the
Beltpack-Config of every Beltpack using this Profile. There are some rules regarding these changes:
·
Changes to the "user rights" are immediately applied to all Beltpacks using this Profile.
·
Changes to settings the "Beltpack user is not allowed to change" are immediately applied to all Beltpacks using this
Profile.
·
Changes to settings the "Beltpack user is allowed to change" are only applied where the old Beltpack setting
matches the setting in the Profile before the change (e.g. if the user already changed it, the new value is not applied;
if it was still on default it is applied).
The Profile of a Beltpack can be changed by the Beltpack-User in the Beltpack-Menu ("Load Profile"; if he has the right),
by the Admin using the Web Interface or by (re-)registering the Beltpack while a different Profile is selected to be used
on all newly registered Beltpacks. A Profile change means that a complete reset to the new Profile defaults regarding
the whole Beltpack-Config.
When a user chooses to load the same Profile that the Beltpack already has, the Beltpack-Config is reset back to Profile
defaults. Should a Beltpack be (re-)registered using the same Profile that it already has, nothing is changed (e.g. no
changes in the Beltpack-Config).
2.4.4 Signalization
In the menu ' General Settings > Signalization ' is defined, how different events are signalized. It is possible to combine
multiple signalization types.
Figure 10: Signalization
Events Signalizations
Call Light orange flashing Call LED
Notification/Beep Vibrate Vibration
Info/Low Battery Beep
Signal sound
Out of Range Voice Voice announcement