Riedel Bolero, Руководство пользователя

Страница: 16 / 84

16
Bolero User Manual A20
2.3.4 Volume Adjustment
The signal level is normalized and limited in the matrix. In the Beltpack the signal level can be manually leveled and
limited.
Rotating either rotary encoder adjusts the master volume of the speaker or headset if the display shows the Main-View.
The header shows a level meter of the current master volume.
Figure 7: Master Volume
Press briefly the Menu key (<0.5 sec.) to change the volume level of a single channel.
Now the volume level of the channels (1+2) can be adjusted by the rotary encoders (A+B). The bars above the key labels
indicate the individual adjusted volume level of the respective channel.
A second brief key press on the Menu key switches to the next channels 3+4, and a third short key press switches to
5+6 and finally to the Reply key. An additional key press switches back to the first channels.
After 3 seconds (factory default setting) with no rotary encoder change, the Beltpack switches back to the Main-View.
Figure 8: Channel Volume