Riedel Bolero 2.0, Руководство пользователя

Страница: 52 / 130

52
Bolero 2.0 User Manual
3.4.3 Brightness Mode
The menu ' Brightness > Brightness-Mode ' allows switching between different predefined and one user specified display
settings. Under ' Brightness > Custom Settings ' the single parameters can be modified.
The predefined modes have following values:
Element Description High Medium Low
Display normal display brightness 100% 60% 20%
Display Dim dimmed display brightness 50% 20% 10%
Display Dim Timer inactivity timer to dim the display Off 20 sec. 5 sec.
Display Off Timer inactivity timer to turn off the display Off Off 60 sec.
Keys normal key brightness 100% 60% 20%
Keys Dim dimmed key brightness 60% 20% 20%
Keys Dim Timer inactivity timer to dim the keys Off 20 sec. 20 sec.
Keys Off Timer inactivity timer to turn off the keys Off Off 240 sec.
Call LED Dim dimmed Call LED brightness 100% 40% 20%
Status LED Dim dimmed Status LED brightness 100% 60% 20%
3.4.4 Profiles
A Profile is assigned to every Beltpack when it is registered. The profile contains default settings for the whole Beltpack-
Config and user rights indicating which settings of the Beltpack-Config the Beltpacks user is allowed to see and/or to
change.
Using the Admin or Registration PIN, a profile can be chosen in the Antennas Web Interface or in the Beltpack-Menu
that should be assigned to all newly registered Beltpacks. The Beltpack stays associated to its profile as long as it is
registered.
Changes to a profile in the web interface are immediately applied to all Beltpacks using the edited profile, regardless of
the previous setting on the Beltpack. Note that only the changed profile settings (highlighted in blue) are applied to all
Beltpacks using this profile, while all other settings on the Beltpacks remain unaffected. Some settings are grouped
(e.g. Keys, Always-On, Rotaries functions, etc.), meaning they can only be edited together. For example, changing a
single key in the Profile Configuration will re-apply the settings for all keys on all Beltpacks using this profile since all
keys are in one group.
The profile of a Beltpack can be changed by the Beltpack-User in the Beltpack-Menu ("Change Profile"; if he has the
right), by the Admin using the Web Interface or by (re-)registering the Beltpack while a different profile is selected to be
used on all newly registered Beltpacks. A profile change means that a complete reset to the new profile defaults
regarding the whole Beltpack-Config.
When a user chooses to load the same profile that the Beltpack already has, the Beltpack-Config is reset back to profile
defaults. Should a Beltpack be (re-)registered using the same profile that it already has, nothing is changed (e.g. no
changes in the Beltpack-Config).