Riedel Bolero 2.0, Руководство пользователя

Страница: 51 / 130

51
Bolero 2.0 User Manual
3.4 Features in Detail
3.4.1 Headset Type
Open the Beltpack Menu by pressing and holding (>3 sec.) the Menu key and select '
Audio
>
Headset Type
'. Select the
microphone type of the headset:
·
Auto Detect The Beltpack automatically detect the headset type.
·
Dynamic Detect
·
Electret Detect
The Beltpack is fixed to a headset type but turns on audio only if a headset is detected.
·
Dynamic
·
Electret
The Beltpack is fixed to a headset type and audio is enabled.
For Headset MAX D2, the "Auto Detect" function is only available for headset revisions equal or higher
than 10.01.
3.4.2 Speaker/Mic
In the menu '
Audio > Speaker/Mic
' is defined, if the audio signal is routed to the internal speaker or to an attached
headset. Connecting a headset will switch the speaker off. Removing a headset won't change the current setting.
The following table shows the usage of the internal and headset microphone:
Speaker Mode: On Speaker Mode: Off
Headset connected Beltpack microphone Headset microphone
no Headset connected Beltpack microphone no microphone active
In the speaker mode the echo cancellation is always active.