Riedel Bolero 2.0, Руководство пользователя

Страница: 33 / 130

33
Bolero 2.0 User Manual
2.6 License Installation
New in 2.0
This chapter describes how to change licenses on Bolero Antennas.
The license on Antennas can be changed by a license file that is provided by your local distributor. The name of the
license file needs to be equal to the serial number of the Antenna where the license will be installed. The serial number
of an Antenna is 13 digits long and contains numbers only (e.g. "1234512345678"). The license file is a "bin"-file (e.g.
"1234512345678.bin"). Every license file is only readable by the Antenna matching the serial number.
A license file (.bin) must be packed into a zip-archive (.zip). Licenses of multiple Antennas can be changed at the same
time, as they are combined in one zip-archive.
A license file is valid for two weeks after building. If the license file will be installed after that period, the
license file will be rejected and needs to be regenerated; even with the same content. The building date of
a license file that should be installed must be newer as date of the already installed license.
Follow these steps to install licenses:
·
Click on the gear icon and select the entry License
Manager
.
Figure 68: License Manager
A dialog is opened to enter the Admin-PIN of the
Network-Space.
·
Enter the Admin PIN , that was defined when the
Network-Space was created.
Figure 69: Dialog – Admin-PIN
·
Click on the ' Install License ' button.
·
Navigate to the location of the license file (zip) and
select the desired one by clicking the
Open button.
Figure 70: License-Manager – Install License
A dialog is opened to confirm the installation of all
compatible licenses.
·
Click the
Apply
button to proceed.
Figure 71: License-Manager – Confirmation