Safety instructions
8
Rieber GmbH & Co. KG
•
The operator must clearly regulate and define the responsibilities for installation, operation,
troubleshooting, maintenance and cleaning.
•
The operator must ensure that all employees who use the device have read and
understood these instructions. In addition, the operator must train the personnel and inform
them of the hazards involved at regular intervals.
•
The operator must provide the personnel with the necessary protective equipment and
issue mandatory instructions on wearing it.
In addition, the operator must ensure that the appliance is always in a perfect technical condition. For
this reason, the following shall apply:
•
The operator must ensure that the maintenance intervals defined in this guide are obeyed.
•
The operator must regularly check all safety devices for functionality and completeness.
•
The operator must ensure that the appropriate media connections are present.
•
The operator must ensure that structural safety measures are performed.
3.4
Personnelqualification requirements
Safe operation requires certain technical skills and personal qualification of each person.
•
The responsibility for organization lies with the ‘
Designated Representative
’ (operator).
According to EN 50110-1 a work supervisor is a person who is appointed to take direct
responsibility for the performance of work. If necessary, this responsibility can be assigned
partly to other persons. [...] The designated representative must instruct all persons
involved in the work on all hazards which may not be obvious for them’.
•
The work may only be performed by ‘
instructed persons’
who have been trained
accordingly. Training, instructions must be repeated, proper understanding must be verified
(ideally by way of an appropriate test).
•
Unloading from the pallet (optional delivery condition) may only be carried out by suitable
and trained operating personnel.
•
Only ‘
Qualified Staff
’ are allowed to carry out repair work.
IEC 60204-1 defines qualified personnel as "persons who, on account of their training and
relevant experience are in the position to recognise risks and avoid potentially dangerous
situations."
•
Electrical work may only be carried out by trained and experienced
electricians
.
Electro-technically instructed persons may only work under the supervision of a qualified
electrician.
•
Handling refrigerant is only permitted by an expert, such as a
refrigeration
expert; applies
to version with chilling compartment (option).
•
Any repairs and/or overhaul during the warranty period may only be carried out by the
manufacturer´s service department of Rieber.
’, page
