background image

4

SAFETY RULES FOR CHARGER

WARNING!

READ AND UNDERSTAND ALL INSTRUCTIONS. 

Failure  to  follow  all  instructions  listed  below,  may 
result in electric shock, fire and/or serious personal 
injury.

  

Before using battery charger,

 read all instructions and 

cautionary markings in this manual, on battery charger, 
battery, and product using battery to prevent misuse of 
the products and possible injury or damage.

CAUTION: 

To reduce the risk of electric shock or damage to the 
charger  and  battery,  charge  only  nickel-cadmium 
rechargeable  batteries  as  specifically  designated 
on your charger. Other types of batteries may burst, 
causing personal injury or damage.

  

Do not use charger outdoors or expose to wet or damp 
conditions. 

Water entering charger will increase the risk 

of electric shock.

  

Use of an attachment not recommended or sold by the 
battery charger manufacturer may result in a risk of 
fire, electric shock, or injury to persons. 

Following this 

rule will reduce the risk of electric shock, fire, or serious 
personal injury.

 

  

Do not abuse cord or charger. 

Never use the cord to 

carry the charger. Do not pull the charger cord rather than 
the plug when disconnecting from receptacle. Damage 
to the cord or charger could occur and create an electric 
shock hazard. Replace damaged cords immediately.

  

Make sure cord is located so that it will not be stepped 
on, tripped over, come in contact with sharp edges 
or moving parts or otherwise subjected to damage or 
stress.

 This will reduce the risk of accidental falls, which 

could cause injury, and damage to the cord, which could 
result in electric shock.

  

Keep  cord  and  charger  from  heat  to  prevent 
damage to housing or internal parts.

  

Do not let gasoline, oils, petroleum-based products, 
etc. come in contact with plastic parts. 

They contain 

chemicals that can damage, weaken, or destroy plastic.   

  

An  extension  cord  should  not  be  used  unless 
absolutely  necessary. 

Use  of  improper  extension 

cord could result in a risk of fire and electric shock. If 
extension cord must be used, make sure:

  a.  That  pins  on  plug  of  extension  cord  are  the 

 same  number,  size  and  shape  as  those  of 
 plug on charger.

  b. That  extension  cord  is  properly  wired  and  in 

 good electrical condition; and

  c.  That  wire  size  is  large  enough  for  AC  ampere 

 rating of charger as specified below: 

    Cord Length (Feet) 

25´ 

50´ 

100´

    Cord Size (AWG)   

16 

16 

16

    

NOTE:

 AWG = American Wire Gauge

  

Do not operate charger with a damaged cord or plug, 

which could cause shorting and electric shock. If damaged, 

have the charger replaced by an authorized serviceman.

  

Do not operate charger if it has received a sharp blow, 

been dropped, or otherwise damaged in any way. 

Take it 

to an authorized serviceman for electrical check to determine 

if the charger is in good working order. 

  

Do not disassemble charger. 

Take it to an authorized 

serviceman when service or repair is required. Incorrect 

reassembly may result in a risk of electric shock or fire.

  

Unplug  charger  from  outlet  before  attempting 

any  maintenance  or  cleaning  to  reduce  the  risk  of 

electric shock.

  

Disconnect  charger  from  the  power  supply  when 

not in use. 

This will reduce the risk of electric shock or 

damage to the charger if metal items should fall into the 

opening. It also will help prevent damage to the charger 

during a power surge.

 

Risk of electric shock. 

Do not touch uninsulated portion 

of output connector or uninsulated battery terminal.

  

Save these instructions. 

Refer to them frequently and use 

them to instruct others who may use this worklight. If you 

loan someone this worklight, loan them these instructions 

also to prevent misuse of the product and possible injury.

IMPORTANT SAFETY INSTRUCTIONS

1.

 SAVE THESE INSTRUCTIONS

 

This manual contains important safety and operating instructions for battery charger 140276003.

2.

 

Before using battery charger,

 read all instructions and cautionary markings on battery charger, battery, and product 

using battery.

3.

 

CAUTION:

 

To reduce the risk of injury, charge only nickel-cadmium rechargeable batteries. Other types of batteries 

may burst, causing personal injury or damage.

Содержание R849

















Отзывы: