background image

10

LED FUNCTION OF CHARGER

See Figure 3.

Fig. 3

POWER

INDICATOR

EVALUATE

INDICATOR

CHARGING

INDICATOR

FULL

INDICATOR

NOTE: 

The 9.6 Volt, 12 Volt, and 14.4 Volt battery 

packs  will  not  slide  all  the  way  down  onto  the 
charger port. Insert 9.6 Volt, 12 Volt, and 14.4 Volt 
battery  packs  until  they  click  into  place  and  are 
aligned with the line on the charger, shown at left. 
Allow up to 5 seconds for the “charge” light to come 
on after the battery pack is inserted.

LED

INDICATOR

BATTERY 

PACK

RED

LED

GREEN

LED

ACTION

Power

Without battery pack ON

OFF

Ready to charge battery pack

Evaluate

Hot battery pack

Flashing

OFF

When  battery  pack  reaches  cooled 
temperature,  charger  begins  fast 
charge mode.

Evaluate

Cold battery pack

Flashing

OFF

When battery pack reaches warmed 
temperature,  charger  begins  fast 
charge mode.

Evaluate

Deeply discharged

Flashing

OFF

Charger pre-charges battery until nor-
mal voltage is reached, then begins 
fast charge mode.

Defective

Defective

Flashing

Flashing

Battery pack or charger is defective

•  If defective, try to repeat the conditions a second time by removing and reinstalling the battery 

pack. If the LED status repeats a second time, try charging a different battery.

•  If a different battery charges normally, dispose of the defective pack (see 

Maintenance

 section).

•  If a different battery also indicates “Defective,” the charger may be defective.

Charging

Fast charging

ON

Flashing

See chart below for charge times

Full

Slow charging

OFF

ON

Fast charging is complete;
charger maintains charge mode

OPERATION

DEFECTIVE 

INDICATOR

GREEN LED

RED LED

BATTERY

AVERAGE CHARGE TIME

COMPACT SERIES

18 min.

HC

27 min.

HC 2.5

34 min.

Содержание R849

















Отзывы: