background image

6

7

SERVICE

Servicing requires extreme care and knowledge and should 
be  performed  only  by  a  qualified  service  technician.  For 
service we suggest you return the product to your nearest 

AUTHORIZED SERVICE CENTER

 for repair. When servic-

ing, use only identical replacement parts.

WARNING: 

To avoid serious personal injury, do not attempt 
to use this product until you read thoroughly and 
understand  completely  the  operator’s  manual. 
Save this operator’s manual and review frequently 
for continuing safe operation and instructing others 
who may use this product.

The operation of any power tool can result in foreign objects being thrown into your eyes, which can result 

in severe eye damage. Before beginning power tool operation, always wear safety goggles or safety glasses 

with side shields or a full face shield when needed. We recommend Wide Vision Safety Mask for use over 

eyeglasses or standard safety glasses with side shields. Always use eye protection which is marked to 

comply with ANSI Z87.1.

WARNING:

SAVE THESE INSTRUCTIONS

SYMBOLS

Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpreta-
tion of these symbols will allow you to operate the tool better and safer.

Read The Operator’s Manual

Safety Alert 

SYMBOL 

NAME 

DESIGNATION/EXPLANATION

To  reduce  the  risk  of  injury,  user  must  read  and  understand 
operator’s manual before using this product.

Eye Protection

Precautions that involve your safety.

Hot Surface

To reduce the risk of injury or damage, avoid contact with 
any hot surface.

Eye, Ear and Head Protection

Always wear other personal protective equipment such as hearing pro-
tection and a hard hat when needed.

Keep Hands Away

Keep hands and body away from the discharge area of the tool.

The following signal words and meanings are intended to explain the levels of risk associated with this product. 

Indicates an imminently hazardous situation, which, if not avoided, will result in death 
or serious injury.

Indicates a potentially hazardous situation, which, if not avoided, could result in death 
or serious injury.

Indicates a potentially hazardous situation, which, if not avoided, may result in minor or 
moderate injury. 

(Without Safety Alert Symbol) Indicates a situation that may result in property damage.

 

SYMBOL   SIGNAL 

MEANING

DANGER:

CAUTION:

CAUTION:

WARNING:

Always wear safety goggles, safety glasses with side shields, or a full 
face shield when operating this product.

Содержание R350RHA





















Отзывы: