RIDGID 66573, Руководство пользователя

Страница: 17 / 68

FlexShaft™ Drain Cleaning Machine
999-995-214.10_REV. A
15
Transportation
Feed all of cable assembly into the drum and
secure the chain knocker with the clamp.
Wrap cord and foot switch hose around the
cord wrap. See Figure 11 . Before moving the
machine, make sure that the telescoping han-
dle is secured into the extended position for
transport. If the machine needs to be lifted,
use proper lifting techniques. Use care moving
equipment on stairs, and be aware of possible
slip hazards.
Figure 11 – Preparing for Transport
Figure 12 – One Transport Method
Loading
With the telescoping handle locked into the
extended position, place machine with wheels
toward the vehicle. Lean the machine back
and rest the loading wheels on the vehicle
bed. Use loading handles (Figure 12) to lift the
machine and slide it onto the vehicle (Figure
13) . Be aware of the machine weight. Use
proper lifting techniques – more than one
person may be required.
Figure 13 – Lifting Unit Onto Vehicle
Storage
The Drain Cleaning Machine
must be kept dry and indoors or well cov-
ered if kept outdoors. Store the machine in
a locked area that is out of reach of children
and people unfamiliar with drain cleaning ma-
chines. This machine can cause serious injury
in the hands of untrained users.
Maintenance
Instructions
WARNING
REV/O-OFF/FOR switch should be O-OFF
and machine unplugged before perform-
ing any maintenance.
Always wear safety glasses and other
appropriate protective equipment when
performing any maintenance.
Cleaning
It is good practice to use a towel to wipe dirt
and debris from the sheath as the cable as-
sembly is pulled from the drain and fed back
into the drum. This will help to keep the drum
clean and reduce the likelihood of the cable
assembly sticking in the drum. If needed,
cable assembly can be pulled from the ma-
chine and the housing opened for flushing/
cleaning.
Clean the machine as needed with hot soapy
water and/or mild disinfectants. Drain the ma-
chine as needed by opening the front cover
(See “Cable Assembly Replacement” step 2) .
WARNING
Loading
Handles