1. GUIDELINES, STANDARDS AND CONDITIONS
1.1 Applicable guidelines and standards
This product complies with the provisions of the European guidelines that follow:
Machinery Directive 2006/42/EC | Low Voltage Directive 2006/95/EC | EMC Directive 2004/108/EC
The harmonized standards (or parts of these standards) that follow are applicable:
NEN-EN-ISO 12100:2010 | NEN-EN-IEC 60204-1 |
NEN 82079-1 (62079: 2001) | NEN5509 | ISO 3864-2
Make sure that this product is only put into operation if the system (in which it will be installed)
complies with the provisions of the applicable standards and guidelines.
1.2 Approved personnel
This product manual contains important information for installers about the installation and
commissioning of a Ridder LogicLink RLL400 control-unit. Read this product manual and instructions
first before the work starts. Approved mechanical and/or electrical installers, with professional
competence, must do all work safe and responsible.
TARGET GROUP FOR EACH CHAPTER
CHAPTER (refer to Table of Contents)
TARGET GROUP
1 2 3 4 5 6 7 8 9 10
User (operator)
• • •
•
(•)
Installer / Approved personnel
• • • • • • • • • •
(•) = Not fully applicable
Keep this product manual with the product during the lifespan. Make sure it is available for users
(operators), installers and approved personnel.
1.3 Warning about discouraged use
The conditions that follow are applicable:
•
Do not change (the construction of) the LogicLink RLL400 control-unit.
•
It is not permitted to use the RLL400 control-unit to lift or move people.
•
Do not let the torque of the motor gearbox be more than its maximum.
•
Do not let the duty cycle of the motor gearbox be more than its maximum.
Refer to §3.3 for a description of the intended use.
1.4 Warranty provisions
For the warranty period and conditions refer to the ‘Conditions’ section on our website at
, or in the Ridder catalogue.
Regulatory Conformity
Ridder Drive Systems B.V.
T
+31 (0)341 416 854 -
F
+31 (0)341 416 611 -
I
3
Содержание LogicLink RLL400
Страница 32: ......
