Ridder HortiJet-Go!, Инструкция по установке и эксплуатации, Страница: 43 / 64

6 User interface
As soon as the dealer has prepared the HortiJet-Go! for use, you can operate the
HortiJet-Go!.
This section first explains how to operate the power switch and the HortiJet pump.
After that, you will find instructions on how to operate the HortiMaX-Go!‘s irrigation
program.
6.1 Power switch
The power switch is located on the cabinet of the HortiJet.
Figure 6-1: The power switch.
Operation:
Turn to position I (on) to switch on the HortiJet.
Turn to position 0 (off) to switch off the HortiJet.
The power switch can also be used as an emergency stop. Turn the switch to
the 0 (off) position to switch off the HortiJet-Go! immediately.
6.2 Operating the HortiJet pump
The knob to operate the HortiJet pump is located on the cabinet. The knob has three
modes of operation: off, manual operation and automatic.
HortiJet pump off
In the off mode, the HortiJet pump is switched off and
cannot be activated by the controller. You can use this
function to:
stop the HortiJet pump in an emergency
situation;
switch the HortiJet-Go! off for a prolonged
period of time.
HortiJet-Go!
43