Add the following component to the EC
dosing group:
EC tanks
Two EC sensors (a control
sensor and a verification
sensor).
Add the following component to the EC
tanks:
Agitator
For the EC dosing group, you need to
specify whether it doses fertilizers
based on EC and/or quantity.
Double-click the EC dosing
group. The
Control type
screen
opens.
Select your preferred settings.
Click the OK button.
You have configured the EC dosing
group.
For the EC tanks, you need to specify
the capacity of the venturis (dosing
channels).
Select the EC tank.
Click the
Start
tab.
Click the Settings button.
Enter the capacity of the
venturis.
5.2.2
Checking the configuration
The configuration created in CX Assistant is saved as a file with the name 'site file'.
This file is then uploaded to the Ridder CX500 on the IPC.
The Ridder CX500 controls the FertiMiX Pro C. This software runs on the IPC
that is located inside the main hardware cabinet.
FertiMiX
41