Ridder Aqua CX300, Руководство пользователя

Страница: 89 / 92

5.9 Re-start
System restart after power failure, settings deleted
An internal malfunction or controller power failure has occurred. The active valve
groups have been deactivated. The pre-set values have been erased.
All settings will need to be re-entered after the controller has restarted automatically.
System restart after power failure, settings saved
An internal malfunction or controller power failure has occurred. The active valve
groups have been deactivated. The pre-set values have been saved.
The next start will be executed after the controller has restarted automatically.
System restart after power failure, currently calculated values have been
erased
An internal malfunction or controller power failure has occurred. The active valve
groups have been deactivated. The pre-set values have been erased.
All the settings will need to be re-entered after the computer has restarted
automatically.
System reinitialized, settings erased
Internal computer malfunction. The active valve groups have been deactivated and
the pre-set values have been erased.
Contact your installer.
All the settings will need to be re-entered after the computer has restarted
automatically.
System reinitialized, settings saved
Internal computer malfunction. The active valve groups have stopped and all the
settings have been deleted.
The next start will be executed after the computer has restarted automatically.
Contact your installer.
System reinitialized, currently calculated values have been erased
Internal computer malfunction. The active valve groups have stopped and all the
settings have been deleted.
The next start will be executed after the computer has restarted automatically.
Contact your installer.
5.10 Sensor
Sensor alarm
The value measured by the sensor is outside the measurement range.
Aqua CX300
89