EM-1010 computerized Embroidery Machine Operation Manual V2.0
19
following color and stopped automatically.
backing one color: After pressing the key, it is moved to start position of previous
color and stopped automatically.
4.3-9 Embroidery Card Contour Operation
After the embroidery card origin is set, if empty stitches embroidery card contour and
embroidering embroidery card contour are required, it can use the operation.
The operation is only operated after setting embroidery card origin and before taking bar
drawing. It cannot be operated after the bar drawing.
Empty stitches embroidery card contour
After setting start point and searching embroidery card contour, press
key and the
tabouret is started idling from start point along the contour (precise range). After idling is
finished, it returns to start point automatically.
Embroidering embroidery card contour
After setting start point and searching embroidery card contour, press
key and
the tabouret is started embroidering contour from the start point and along the pattern
surrounding. After embroidering is finished, it returns to start point automatically.
4.3-10 Operation of Returning to Embroidering Point in Power Failure
The operation is mainly applied for sudden power failure in embroidering process and
when the tabouret appears blocking. It takes operation after powering on.
When the tabouret type is “Other”, the operation is only valid when absolute origin
of tabouret is searched before embroidering.
In working status, press
key to enter into machine operation interface. Press
key and the system prompts “Press OK to start searching absolute origin”. Press
