EM-1010 computerized Embroidery Machine Operation Manual V2.0
15
4.3-6-1 Set Color Changing Sequences
In color changing sequences setting interface, press number key to enter into color
changing sequences setting. Change color 1-200 times from the 1
st
page (the system supports
max 200 times of color changing sequences). When the interface is opened, the cursor is
started from the last value position with needle bar automatically. Press the number key and
input corresponding needle bar number of current color changing sequence. The cursor is
moved to next color changing sequences automatically.
In the setting process, if current needle bar number has error, click the selected number
to reset the value.
If there is no color changing sequence setting, it uses current needle bar to take
embroidering.
If color changing times are not set as the max color changing number of current
embroidery card, use currently set color changing number to take cycle orders.
Upper value in
means current page, and lower value measn max pages
of current embroidery card number. Left and right keys can take page turning. However, max
page turning value cannot be larger than max pages of currebt embroidery card.
