EM-1010 computerized Embroidery Machine Operation Manual V2.0
6
Part 2 Embroidery Card Input Operation
Embroidery card input operation is to input embroidery card in U disk into memory. It
can be operated at embroidery preparation status and embroidery card status.
Embroidery card input is to input files on external storage medium into system memory
for convenient embroidery selection. If there is no embroidery card in memory, it will enter
into the interface when the system is started.
The system supports reading Tajima DST and Behringer DSB formats of embroidery
card files.
Before reading the embroider card, insert the U disk into USB interface, and then take
operation panel key operation.
2.1 Input U-disk Embroidery Card to Memory
After U disk us inserted, press
key to enter into embroidery card management
interface. It will read the contents in U disk, as in the following Fig.
When embroidery card interface is selected, pres
key to switch to U disk
interface.
Click embroidery card to input. Multi-option is available (which requires software
