Ricoh VD4007001, Руководство по эксплуатации

Страница: 44 / 136

Preparing the Machine
36
1
Using as a Windows Network Printer
This describes how to install the PCL or RPCS printer driver when using the
printer as a Windows network printer.
To use the print server, install the printer driver by selecting “Network printer
server”, and then select the Windows 2000 / XP / Vista, and Windows Server
2003 / 2003 R2.
This section assumes that the client has already been configured to communicate
with a Windows 2000 / XP / Vista, and Windows Server 2003 / 2003 R2. Do not
begin the following procedure before the client is set up and configured correct-
ly.
Important
❒
To install the printer driver under Windows 2000 / XP / Vista, and Windows
Server 2003 / 2003 R2, you must have an account that has Manage Printers
permission. Log on as an Administrators or Power Users group member.
❒
If you print with a print server connected to the printer using the SmartDe-
viceMonitor port, Recovery Printing and Parallel Printing cannot be used
from the client.
❒
If you print with a Windows XP / Vista or Windows Server 2003 / 2003 R2
print server, notification functions of SmartDeviceMonitor may not be used
with the client.
Installing the PCL or RPCS Printer Driver
A
Quit all applications currently running.
B
Insert the CD-ROM into the CD-ROM drive.
The installer starts.
C
Select an interface language, and then click [ OK ] .
The default interface language is English.
D
Click
[ PCL/RPCS Printer Drivers ]
.
E
The software license agreement appears in the [ License Agreement ] dialog
box.
After reading the agreement, click [ I accept the agreement. ] , and then click [ Next > ] .
F
Select the printer driver you want to use in the
[ Select Program ]
dialog box.
You can select several printer drivers.
G
Click [ Next > ] .
H
Select the [ Printer Name ] check box to select the printer models you want to
use.
The printer name can be changed in the [ Change settings for 'Printer Name' ] box.