Ricoh VB2807800, Инструкция по эксплуатации, копия для справок

Страница: 28 / 76

Copying
22
2
Copying from the Bypass Tray
Use the bypass tray to copy onto OHP
transparencies, thick paper, enve-
lopes and copy paper that cannot be
loaded in the paper trays.
Important
❒
Paper longer than 357 mm may be-
come wrinkled, may not feed in,
and may jam.
Note
❒
If you do not use standard size
copy paper, or if you use special
paper, you should enter its vertical
and horizontal dimensions. See
p.18 “Placing custom size origi-
nals”. The sizes you can enter are
as follows:
❒
When copying onto OHP transpar-
encies or paper heavier than 157
g/m
2
(about 42 lb.), you need to
specify the paper type. See p.24
“When copying onto special pa-
per” .
❒
The maximum number of sheets
you can load at the same time de-
pends on paper type. The maxi-
mum number of sheets should not
exceed the upper limit.
A
Open the bypass tray.
B
Push up the paper guide release
lever.
1.
Paper guide release lever
Metric
version • Vertical: 90–216 mm
• Horizontal: 139–600 mm
Inch
version • Vertical: 3.55"–8.50""
• Horizontal: 5.48"–23.62”
ABU027S