Ricoh TotalFlow Print Server R-62, Руководство по установке

Страница: 57 / 66

Problem Causes Solutions
Cannot access the print server
via the web browser on a client
computer. The Ethernet cable is not
connected to the print server or
the client computer. Check that the print server is
correctly connected to the
network. For details about how
to connect the network, see
page 26 "Connecting Devices
to the Print Server" and page 34
"Configuring Network Settings".
Cannot access the print server
via the web browser on a client
computer. The IP address or host name
entered in the web browser is
wrong. Enter the correct IP address or
host name.
Cannot access the print server
via the web browser on a client
computer. The IP address of the client
computer is restricted to access
to the remote console. In the [Restricted IP Addresses]
under the [Security] of the
[Configuration] page, change
the range of the restricted IP
addresses or disable the
restriction.
The [TotalFlow] icon does not
appear on the control panel of
the printer. The printer does not recognize
the print server correctly. When you turn on the print
server before turning on the
printer, the print server may not
start correctly. In this case, turn
off the print server, and then turn
it on again.
4. Troubleshooting and Error Codes
56