Ricoh TCRU/ORU, Руководство по устранению неисправностей

Страница: 163 / 184

11. Advanced Instructions
Operating Procedure for Color Calibration
To improve color reproduction and achieve color output with consistent quality, follow this procedure.
It is recommended to perform color calibration for each print job.
To improve CMYK image reproduction, adjust image density, and then perform calibration. Also, you
can improve mixed color reproduction by adjusting image density and color registration and performing
calibration. To perform calibration, calibrate using the automated inline sensor equipped in the printer or
the optional ES-2000.
1. In the [Machine: Image Quality] group on the [Adjustment Settings for Operators] menu,
select 0201: [Execute Image Quality Adjustment] and execute [Adjust Image Density].
2. When the color density adjustment is completed, press [Exit].
3. Press [Exit].
4. Press [Home] ( ) at the bottom of the screen in the center.
5. Press the [User Tools] icon ( ).
6. Press [Machine Features].
7. Press [Maintenance].
8. Press [Color Registration].
9. Press [OK].
Auto color registration takes about 20 seconds.
10. Press [Exit].
11. Press [User Tools] ( ).
12. [Home] ( ) at the bottom of the screen in the center.
13. Start Fiery Command WorkStation 6.
Start Calibrator
How you start Calibrator depends on what you want to do.
1. To calibrate for any calibration setting on the Fiery server, do one of the following:
• In Job Center, click the Calibrate icon in the toolbar.
• In Device Center, click the General tab, click Tools, and then click Calibrate.
2. To calibrate for the calibration setting used in a particular job, select the job in Job Center and then
select Actions > Calibrate.
161