Ricoh SR3260 Скачать руководство пользователя

Страница: 27 / 128

1.Detailed Descriptions

Shift Tray Ascent/Descent Mechanism

Ascent/descent is performed according to the number of sheets of paper (paper surface height)

released to the shift tray. This height is detected by the Shift Tray Paper Surface Sensor (S13) [B]

switching OFF/ON due to the rear end press lever [A], and is adjusted up and down by the Tray Lift

Motor (DCM4) [C] so that the Shift Tray Paper Surface Sensor (S13) switches OFF (blocked).

Ascent

The Shift Tray Paper Surface Sensor (S13) detects the movement upper limit of the shift tray, and

disconnects the control circuit of the Tray Lift Motor (DCM4).

When paper is removed from the shift tray and the Shift Tray Paper Surface Sensor (S13) switches ON

(unblocked), the shift tray ascends, and when the sensor switches OFF (blocked), it stops.

Descent

•

In shift mode
When every 5 sheets of paper are delivered to the shift tray, the tray moves up and down.

The shift tray first descends until the Shift Tray Paper Surface Sensor (S13) switches ON

(unblocked), and the shift tray then ascends until the sensor switches OFF (blocked).

•

In stapling mode

When exiting the paper to the shift tray, the Tray Lift Motor (DCM4) switches ON/OFF for a definite

time, and the tray height is adjusted.

Shift Tray Full Detection

Small size (Smaller than A4 SEF, LT LEF)

When the shift tray descends and the actuator [A] under the shift tray switches the Shift Tray Lower

Limit Sensor (Lower) (S12) [B] OFF (blocked), shift tray "Full" is detected.

Содержание SR3260

































































































































Результаты поиска

Содержание SR3260

Отзывы:

Похожие инструкции для SR3260

Бренды по названию

Популярные бренды

Ricoh SR3260, Руководство по обслуживанию на месте

Результаты поиска

Содержание SR3260

Отзывы:

Похожие инструкции для SR3260

Бренды по названию

Популярные бренды