Ricoh SP C260SFNw, Руководство пользователя, Страница: 81 / 444

ADF
• Paper size: 140 to 216 mm (5
1
/
2
to 8
1
/
2
inches) in width, 140 to 356 mm (5
1
/
2
to 14
inches) in length
• Paper weight: 52 to 105 g/m
2
(13.8 to 28.0 lb.)
• Only 1 sheet of an original can be placed on the exposure glass at a time.
• In the ADF for SP C260SFNw, up to 35 sheets of originals can be placed at once (when using
paper weighing 80 g/m
2
, 20 lb.).
• In the ADF for SP C261SFNw/SP C262SFNw, up to 50 sheets of originals can be placed at once
(when using paper weighing 80 g/m
2
, 20 lb.).
Types of originals not supported by the Auto Document Feeder
If placed in the ADF, the following types of original might be damaged or become jammed, or result in
gray or black lines appearing on prints:
• Originals larger or heavier than recommended
• Stapled or clipped originals
• Perforated or torn originals
• Curled, folded, or creased originals
• Pasted originals
• Originals with any kind of coating, such as thermal fax paper, art paper, aluminum foil, carbon
paper, or conductive paper
• Originals with perforated lines
• Originals with indexes, tags, or other projecting parts
• Sticky originals such as translucent paper
• Thin, highly flexible originals
• Thick originals such as postcards
• Bound originals such as books
• Transparent originals such as OHP transparencies or translucent paper
• Originals that are wet with toner or white out
Unscannable image area
Even if you correctly place originals in the ADF or on the exposure glass, margins of a few millimeters on
all four sides of the original might not be scanned.
Placing Originals
79