Ricoh SP 3710DN Скачать руководство пользователя

Страница: 20 / 208

Installing Option

This section explains how to install options.

Attaching Paper Feed Unit

• Touching the prongs of the power cable's plug with anything metallic constitutes a fire and

electric shock hazard.

• It is dangerous to handle the power cord plug with wet hands. Doing so could result in electric

shock.

• Before installing or removing options, always disconnect the power cord plugs from the wall

outlet and allow time for the main unit to fully cool. Failing to take these precautions could result
in burns.

• The printer weighs approximately 13 kg (29 lb.). Lift the printer using the inset grips on both

sides of the printer, and then move it horizontally to the place where you want to use it.

• Lifting the paper feed unit carelessly or dropping may cause injury.
• Before moving the machine, unplug the power cord from the wall outlet. If the cord is

unplugged abruptly, it could become damaged. Damaged plugs or cords can cause an
electrical or fire hazard.

• Tray 1 is required to print using the optional paper feed unit. Without Tray 1, paper jams will occur.
• Do not hold the tray to lift the machine.

Turn off the machine's power, and then pull the power plug out of the wall outlet.

Remove the adhesive tape and the cushioning material from the optional paper feed unit.

DYG315

1. Guide to the Machine

Содержание SP 3710DN

















































































































































































































Результаты поиска

Содержание SP 3710DN

Отзывы:

Похожие инструкции для SP 3710DN

Бренды по названию

Популярные бренды

Ricoh SP 3710DN, Руководство пользователя

Результаты поиска

Содержание SP 3710DN

Отзывы:

Похожие инструкции для SP 3710DN

Бренды по названию

Популярные бренды