manualshive.com logo in svg

Ricoh SP 202 SN, Руководство по эксплуатации

Поделиться
Скачать
Ricoh SP 202 SN Скачать руководство пользователя страница 50

1. Approx. 4.1 mm (0.2 inches)
2. Approx. 3 mm (0.1 inches)
3. Approx. 4.3 mm (0.2 inches)

Scanner (Scan to E-mail, Scan to FTP, Scan to Folder, Scan to USB)

1. Approx. 1 mm (0.05 inches)
2. Approx. 1 mm (0.05 inches)
3. Approx. 2 mm (0.08 inches)

Placing Originals on the Exposure Glass

• Do not place originals until all correction fluid or toner becomes completely dry. Doing so may

create marks on the exposure glass that will appear on copies.

1.

Lift the exposure glass cover.

2.

Place the original face down on the exposure glass. The original should be aligned to the
rear left corner.

CTT023

3.

Lower the exposure glass cover.

Hold down the cover with your hands when using thick, folded, or bound originals and when the
cover cannot be lowered completely.

Placing Originals in the Auto Document Feeder

• Do not place originals mixed with different in the ADF all at once.
• To prevent multiple sheets from being fed at once, fan the bundle of your original before placing

them in the ADF.

2. Loading Paper

48

Содержание SP 202 SN

















































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды