Ricoh SP 200S страница 310 Скачать руководство пользователя

Страница: 310 / 357

Paper Feed Problems

If the machine is operating but paper will not feed or paper jams occur frequently, check the condition of
the machine and paper.

Problem

Solution

Paper does not feed smoothly.

• Use supported types of paper. See p.9 "Supported

Paper".

• Load paper correctly, making sure that the paper guides

are properly adjusted. See p.13 "Loading Paper".

• If the paper is curled, straighten the paper.
• Take out the paper from tray and fan it well. Then,

reverse the top and bottom of the paper, and put it in the
tray.

Paper jams occur frequently.

• If there are gaps between the paper and the paper

guides, adjust the paper guides to remove the gaps.

• Avoid printing on both sides of paper when printing

images that contain large areas of solid color, which
consume a lot of toner.

• Use supported types of paper. See p.9 "Supported

Paper".

• Load paper only as high as the upper limit markings on

the paper guide.

Multiple sheets of paper are fed at
one time.

• Fan the paper well before loading. Also make sure that

the edges are even by tapping the stack on a flat surface
such as a desk.

• Make sure that the paper guides are in the right position.
• Use supported types of paper. See p.9 "Supported

Paper".

• Load paper only as high as the upper limit markings on

the paper guide.

• Check that paper was not added while there was still

some left in the tray.
Only add paper when there is none left in the tray.

6. Troubleshooting

Содержание SP 200S






































































































































































































































































































































































Результаты поиска

Содержание SP 200S

Отзывы:

Похожие инструкции для SP 200S

Бренды по названию

Популярные бренды

Ricoh SP 200S, Руководство по эксплуатации

Результаты поиска

Содержание SP 200S

Отзывы:

Похожие инструкции для SP 200S

Бренды по названию

Популярные бренды