Ricoh Pro C720s, Руководство по эксплуатации

Страница: 102 / 212

Input/Output
This section describes the user tools in the Input/Output menu under Copier / Document Server Features.
Default settings are shown in bold type.
SADF Auto Reset
In SADF mode, an original must be set within a specified time after the previous original has been fed.
The default setting is 5 second(s).
You can adjust this time from 3 to 99 seconds in increments of 1 second.
Copy Eject Face Method in Glass Mode
You can specify the way in which copies are delivered when copying an original placed on the
exposure glass.
The default setting is Face Up.
Memory Full Auto Scan Restart
When memory becomes full while scanning originals, the machine can make copies of scanned
originals first, and then automatically proceed scanning remaining originals.
The default setting is Off.
• On
You can leave the machine unattended to make copies, but sorted pages will not be sequential.
• Off
When memory becomes full, the machine stops operation allowing you to remove the copy
pages delivered on the output tray.
Sort/ Stack Shift Tray Setting
You can specify whether to shift the Shift Tray in sort mode or stack mode.
The default setting is On.
Insert Separation Sheet
You can specify the number of copy pages for inserting the separation sheet from 1 to 999 pages in
increments of 1 page.
The default setting is 1 set(s).
Letterhead Setting
If you select [Yes] in this function, the machine rotates the image correctly.
The default setting is No.
Orientation-fixed (top to bottom) or two-sided paper might not be printed correctly depending on
how the originals and paper are placed.
4. Copier/Document Server Features
100
4