Ricoh Pro C5200s, Руководство пользователя

Страница: 207 / 300

Direction of paper
grain
Tray 1 or LCT Trays 2–3
Bypass tray or
wide LCT
Not recommended
• Select the appropriate paper thickness under Paper Weight as the paper thickness for the tray in
[Tray Paper Settings].
• Even if thick paper is loaded as described above, normal operations and print quality might still not
be possible, depending on the paper type.
• Prints might have prominent vertical creases.
• Prints might be noticeably curled. Flatten out prints if they are creased or curled.
Envelopes
This section gives you various details about and recommendations concerning envelopes.
• Do not use window envelopes.
• Fan the envelopes before loading them. Otherwise, the envelopes may stick together because of
the glue on them. If fanning does not prevent them sticking together, load them one by one. Note
that some types of envelopes cannot be used with this machine.
• Misfeeds might occur depending on the length and shape of the flaps.
• When loading envelopes in the orientation, load them with flaps fully open. Otherwise, they
might not feed into the machine.
• Before loading envelopes, press down on them to remove any air from inside, flatten out all four
edges. If they are bent or curled, flatten their leading edges (the edge going into the machine) by
running a pencil or ruler across them.
In copier mode
The way to load envelopes varies depending on the orientation of the envelopes. When copying
onto envelopes, load them according to the applicable orientation shown below:
Recommended Paper
205