manualshive.com logo in svg

Ricoh Pro 5210S, Руководство по эксплуатации, Страница: 97 / 164

Поделиться
Скачать
Ricoh Pro 5210S Скачать руководство пользователя страница 97

Description of Paper Icons

You can check the custom paper status by checking the paper icon in the "Edit Custom Paper" screen. If 
you change the custom paper profile in the advanced settings, the paper icon changes as follows:

1

DSN005

1. Paper icon

Not adjusted

Custom paper profile set to the default setting in the advanced settings

Adjusted

Custom paper profile changed from the default setting in the advanced 
settings

• If you specify a custom paper profile in the "Edit Custom Paper" screen without registering it from 

the paper library, the paper icon will not appear for that custom paper profile.

• If you change the custom paper profile from the default setting in the advanced settings, and then 

change the setting back to the default again, the paper icon will remain as "Adjusted".

Description of Paper Icons

95

Содержание Pro 5210S





































































































































































Отзывы:

Нет отзывов