manualshive.com logo in svg

Ricoh Pro 5210S, Руководство по эксплуатации, Страница: 19 / 164

Поделиться
Скачать
Ricoh Pro 5210S Скачать руководство пользователя страница 19

Notes on How Adjustment Settings are Applied 

to Printed Copies

The adjustment settings are applied to printed copies according to the settings specified for each paper 
tray, paper size, and paper weight.
Depending on the adjustment setting, the same settings specified under different categories may be 
applied to printed copies concurrently.

• Settings for each paper tray
• Settings for each paper weight
• Settings for each paper size

Settings for each paper tray

These adjustment settings can be specified for each paper tray.
The settings are applied only to printed copies fed from each paper tray.

Settings for each paper weight

These adjustment settings can be specified for each paper weight.
The settings are applied only to printed copies of each paper weight.

Settings for each paper size

These adjustment settings can be specified for each paper size.

Notes on How Adjustment Settings are Applied to Printed Copies

17

Содержание Pro 5210S





































































































































































Отзывы:

Нет отзывов