manualshive.com logo in svg

Ricoh Pro 5210S, Руководство по эксплуатации, Страница: 102 / 164

Поделиться
Скачать
Ricoh Pro 5210S Скачать руководство пользователя страница 102

Backing up and Restoring Custom Paper 

Profiles

Backing up Custom Paper Profiles Saved in the Saved Paper Library

The machine administrator can back up custom paper profiles saved in the Saved Paper Library to the 
SD card inserted in the back of the machine.
The backup can be used to restore the custom paper profiles if the controller board has to be replaced.
To prevent data loss, we recommend making regular backups. Only the customer engineer is allowed to 
perform data restoration using a backup. Contact your service representative.

1.

Open the [Adjustment Settings for Skilled Operators] menu.

For details, see page 12 "Accessing Adjustment Settings for Skilled Operators".

2.

Press 05: [Machine: Maintenance].

3.

Press 0703: [Back Up / Restore Custom Paper Data].

4.

Press [Back Up Library Archive].

5.

Press [OK].

6.

Press [Exit].

Backing up Custom Paper Profiles Registered Under the [Edit] Setting

The machine administrator can back up and restore custom paper profiles registered under the [Edit] 
setting.

Backing up the Data

1.

Insert an SD card into the SD card slot on the side of the control panel.

2.

Open the [Adjustment Settings for Skilled Operators] menu.

3. Custom Paper Settings for Administrators

100

Содержание Pro 5210S





































































































































































Отзывы:

Нет отзывов