Ricoh Pro 1106EX Скачать руководство пользователя страница 205

Страница: 205 / 234

Using the Document Server

185

Note

❒

You can search the target document using, in step

[

User Name

]

[

File

Name

]

situated in the left side of the screen.

❒

Some of the selected document may not be printed due to the difference in
the size or resolution.

❒

When changing the printing order, cancel the highlight and then specify
the order correctly.

❒

Pressing

[

Order

]

displays the selected documents in the printing order.

❒

The copy and printer features holds the specified printing conditions after
the operation is over and applies them at the next printing.

❒

When two or more documents are specified, the printing conditions are
stored on the first document but not on the succeeding documents.

❒

Following settings are available for the printing conditions. For respective
printing results, see “Copier Functions”.
• Book binding style (2 Sided Top to Top, 2 Sided Top to Bottom, Maga-

zine, Booklet)

• Treatment of front cover (Cover/Slip Sheet, Edit / Stamp)
• Finish (Sort, Rotate Sort, Stack, Staple, Punch)

❒

When printing two or more copies while selecting the sort function, you
can confirm the finish by printing only one copy.

❒

When printing two or more documents at a time, you can print them as a
single continuous document by specifying the order of their printing.

❒

When printing two or more documents at a time, the printing conditions
set for the first document are applied to all the remaining documents.

❒

When two or more documents are selected, pressing

[

][

]

allows you to

confirm the user name, document name and printing order of the docu-
ment selected in step

❒

Pressing

[

File List

]

restores the document selection screen.

Reference

p.49 “Copier Functions”

When Interrupting Printing

Following describes the procedure for interrupting printing work.

Press the

{

Stop

}

key

Press

[

Suspend

]

Содержание Pro 1106EX











































































































































































































































Результаты поиска

Содержание Pro 1106EX

Отзывы:

Похожие инструкции для Pro 1106EX

Бренды по названию

Популярные бренды

Ricoh Pro 1106EX, Руководство по эксплуатации

Результаты поиска

Содержание Pro 1106EX

Отзывы:

Похожие инструкции для Pro 1106EX

Бренды по названию

Популярные бренды