30
English
Basic Operations
Enter
Menu
AV
Mute
Powering On the Projector
1. Ensure that the power cord and signal cable are securely
connected. The Power indicator will turn red.
2. Remove the lens cap.
3. Turn on the lamp by pressing the
button on the control
panel or the
button on the remote control.
The Power
indicator
will flash blue.
The startup screen will display and the Power indicator will
turn blue.
4. The first time you use the projector, you will be asked
to select the preferred language. Turn on your source
(computer, notebook, video player, etc.) The projector will
detect your source automatically.
Make sure that the “Auto Source” has been set to “On”.
Powering On/Off the Projector
Turn on the
projector first and then
the signal sources.
Note
Lens Cap
Freeze
Enter
Computer
DisplayPort
Video
Menu
AV Mute
MHL
Control
Power
Keystone
Picture
0
2
1
3
5
4
6
8
7
9
Aspect
Eco
Volume
S-Video
HDMI
Input
Auto Set
Magnify
Power
1
2
OR
CAUTION:
• Do not look into the lens while the lamp is on. The strong light from the
lamp may cause damage to your eyesight.
• Do not block the air intake or exhaust. Doing so could cause a fire due to
internal overheating.
• Do not place your hands, face, or other objects near the air exhaust, the
lamp cover or the bottom of the unit. Doing so could result in injury and/or
damage the object.
If you connect
multiple sources at
the same time, press
“Input” on the control
panel or the desired
source button on the
remote control to
switch inputs.
Note
Enter
Menu
AV
Mute
